# SetGlobalCfg order dependency

**URL:** <https://femdesign.discourse.group/t/setglobalcfg-order-dependency/132>\
**Category:** Features & Ideas\
**Created:** [21 December 2023 14:27 UTC](https://femdesign.discourse.group/t/setglobalcfg-order-dependency/132 "2023-12-21T14:27:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![asehlstrom](https://avatars.discourse-cdn.com/v4/letter/a/50afbb/32.png) [@asehlstrom](https://femdesign.discourse.group/u/asehlstrom)\
**Post date:** [21 December 2023 14:27 UTC](https://femdesign.discourse.group/t/setglobalcfg-order-dependency/132/1 "2023-12-21T14:27:38Z")

</div>

The SetGlobalCfg component must be wired _after_ the OpenModel component for the configurations to be loaded into FEM-Design. I use if to force bar element division to desired number.

Is it possible to make sure it loads regardless which order it is wired?

---

<div class="post-metadata">

**Author:** ![MarcoPelle](https://dub1.discourse-cdn.com/flex017/user_avatar/femdesign.discourse.group/marcopelle/32/6_2.png) [@MarcoPelle](https://femdesign.discourse.group/u/MarcoPelle)\
**Post date:** [21 December 2023 14:43 UTC](https://femdesign.discourse.group/t/setglobalcfg-order-dependency/132/2 "2023-12-21T14:43:58Z")

</div>

thanks @asehlstrom for let us know!

I was not aware about this issue. Looks like that FEM-Design reset the GlobalCfg at every new open file.

_Is it possible to make sure it loads regardless which order it is wired?_  
It might be possible but it would require a big effort on our side.

However, we might be able to solve the issue early next year with the upcoming version of FEM-Design 23!