# Auto-Design output \[SOLVED\]

**URL:** <https://femdesign.discourse.group/t/auto-design-output-solved/95>\
**Category:** Grasshopper\
**Tags:** solved\
**Created:** [26 October 2023 14:25 UTC](https://femdesign.discourse.group/t/auto-design-output-solved/95 "2023-10-26T14:25:17Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mosa](https://avatars.discourse-cdn.com/v4/letter/m/73ab20/32.png) [@Mosa](https://femdesign.discourse.group/u/Mosa)\
**Post date:** [26 October 2023 14:25 UTC](https://femdesign.discourse.group/t/auto-design-output-solved/95/1 "2023-10-26T14:25:17Z")

</div>

Im trying to use the autodesign in grasshopper and i can see the calculation working fine. When i go to look in the results, if i have analysis connected with calcDesign, case and comb sett to true i get an empty result. if i disconect analysis i get the new model but when i analyse it again i get over 100% utilization. The same thing happens when i disconnect result types.  
The only way i got a viable result was when i ran the autodesign twice but didnt apply changes on the secon oneand only connecte result types on the secon one.  
and i keep getting the warning that changes wil be applyed, when it happens the window does not close so i get 10 windows open at the same time.

 ![image](https://europe1.discourse-cdn.com/flex017/uploads/femdesign_api/original/1X/861d584b62c7681f097eed714faf9a6dad4383c6.png)

---

<div class="post-metadata">

**Author:** ![Mosa](https://avatars.discourse-cdn.com/v4/letter/m/73ab20/32.png) [@Mosa](https://femdesign.discourse.group/u/Mosa)\
**Post date:** [27 October 2023 08:57 UTC](https://femdesign.discourse.group/t/auto-design-output-solved/95/2 "2023-10-27T08:57:45Z")

</div>

I just opened the file again and now it outputs the model with the new beams but the results are empty. i have not made any changes since the last post.

 ![image](https://europe1.discourse-cdn.com/flex017/uploads/femdesign_api/original/1X/a3715015e2a46c13d4157152d0bb21f507f32e57.png)

---

<div class="post-metadata">

**Author:** ![MarcoPelle](https://dub1.discourse-cdn.com/flex017/user_avatar/femdesign.discourse.group/marcopelle/32/6_2.png) [@MarcoPelle](https://femdesign.discourse.group/u/MarcoPelle)\
**Post date:** [27 October 2023 14:24 UTC](https://femdesign.discourse.group/t/auto-design-output-solved/95/3 "2023-10-27T14:24:53Z")

</div>

`Application.Run` has been refactored within the mileston 22.9.0 and the code has been improved for autodesign.

In detail:

If the user set `autodesign == true` and `check == true`, the API will automatically trigger a new analysis with the new sections and dead load. Sequentally, it will be possible to get results based on the new structure